Dell PowerEdge M805 - Manual (Page 239)

Link Dependency Commands 211
Example
console(config-linkDep-group-1)#depends-on ethernet g10
no depends-on ethernet
Use the no depends-on ethernet command to remove the dependent Ethernet ports list.
Syntax
no depends-on ethernet intf-list
• intf-list—List of Ethernet interfaces. Separate nonconsecutive ports with a comma and
no spaces. Use a hyphen to designate the range of ports. (Range: Valid Ethernet interface
list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)#no depends-on ethernet g10
depends-on port-channel
Use the depends-on port-channel command to add the dependent port-channels list.
Syntax
depends-on port-channel port-channel-list
• port-channel-list—List of port-channel interfaces. Separate nonconsecutive ports with a
comma and no spaces. Use a hyphen to designate the range of ports. (Range: Valid port-
channel interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode