Stack – Dell PowerEdge M805 User Manual
Page 297
System Management Commands
275
Example
The following example displays a system version (this version number is only for
demonstration purposes).
console>show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
------------------------------------------------------------------
unit
image1
image2
current-active
next-active
-----------------------------------------------------------------
1
K.3.9.1
0.0.0.0
image1
image1
2
K.3.9.1
0.0.0.0
image1
image1
stack
Use the stack command in Global Configuration mode to set the mode to Stack Global
Config.
Syntax
stack
Default Configuration
This command has no default mode.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the mode to Stack Global Config.
console(config)#stack
console(config-stack)#