Dell PowerEdge M805 - Manual (Page 438)

430 SNMP Commands
www
.dell.com | support.dell.com
• ip-address—Management station IP address. Default is all IP addresses.
Default Configuration
No community group is defined.
Command Mode
Global Configuration mode
User Guidelines
The group-name parameter can be used to restrict the access rights of a community string.
When it is specified, the software:
• Generates an internal security-name.
• Maps the internal security-name for SNMPv1 and SNMPv2 security models to the group-
name.
Example
The following example maps a community access string dell_community to group dell_group.
console(config)# snmp-server community-group dell_community
dell_group 192.168.29.1
snmp-server contact
Use the snmp-server contact command in Global Configuration mode to set up a system contact
(sysContact) string. To remove the system contact information, use the no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
• text—Character string, 0 to 160 characters, describing the system contact information.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.