Dell PowerEdge M805 - Manual (Page 791)

Routing Information Protocol (RIP) Commands 799
Interface...................................... 15
IP Address..................................... -----
Send version................................... RIP-2
Receive version................................ Both
RIP Admin Mode................................. Disable
Link State..................................... -----
Authentication Type............................ MD5
Authentication Key............................. "pass123"
Authentication Key ID.......................... 35
Bad Packets Received........................... -----
Bad Routes Received............................ -----
Updates Sent................................... -----
show ip rip interface brief
Use the show ip rip interface brief command in Privileged EXEC mode to display general
information for each RIP interface. For this command to display successful results routing must be
enabled per interface (i.e. ip rip).
Syntax
show ip rip interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays general information for each RIP interface.
console#show ip rip interface brief
Send Receive RIP Link
Interface IP Address Version Version Mode State