Dell PowerEdge M805 - Manual (Page 244)

216 LLDP Commands
www
.dell.com | support.dell.com
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to reset all LLDP statistics.
console#clear lldp statistics
lldp notification
Use the lldp notification command in Interface Configuration mode to enable remote data change
notifications. To disable notifications, use the no form of this command.
Syntax
lldp notification
no lldp notification
Default Configuration
By default, notifications are disabled on all supported interfaces.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to enable remote data change notifications.
console(config-if-1/g3)#lldp notification
lldp notification-interval
Use the lldp notification-interval command in Global Configuration mode to limit how frequently
remote data change notifications are sent. To return the notification interval to the factory default,
use the no form of this command.
Syntax
lldp notification-interval interval