Dell PowerEdge M805 - Manual (Page 541)

VLAN Commands 537
• groupid—The protocol-based VLAN group ID, which is automatically generated when
you create a protocol-based VLAN group with the vlan protocol group command. To see
the group ID associated with the name of a protocol group, use the show port protocol all
command.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the removal of the protocol-based VLAN group identified as
"2."
console(config)#vlan protocol group remove 2