Dell PowerEdge M805 - Manual (Page 446)

438 SNMP Commands
www
.dell.com | support.dell.com
• engineid-string—Specifies the engine ID of the remote SNMP entity to which the user
belongs. The engine ID is a concatenated hexadecimal string. Each byte in the
hexadecimal character string is two hexadecimal digits. The remote engine id designates
the remote management station, and should be defined to enable the device to receive
acknowledgements to "informs." (Range: 5-32 characters.)
• auth-md5—The HMAC-MD5-96 authentication level. Enter a password. (Range: 8-64
characters.)
• auth-sha—The HMAC-SHA-96 authentication level. Enter a password. (Range: 8-64
characters.)
• password—A password. (Range: 1 to 32 characters.)
• auth-md5-key—The HMAC-MD5-96 authentication level. Enter a pregenerated MD5
key.
• auth-sha-key—The HMAC-SHA-96 authentication level. Enter a pregenerated SHA key.
• md5-key—Character string - length 32 hex characters.
• sha-key—Character string - length 48 characters.
• priv-des—The CBC-DES Symmetric Encryption privacy level. Enter a password.
• priv-des-key—The CBC-DES Symmetric Encryption privacy level. The user should enter
a pregenerated MD5 or SHA key depending on the authentication level selected.
• des-key—The pregenerated DES encryption key. Length is determined by authentication
method selected - 32 hex characters if MD5 Authentication is selected, 48 hex characters
if SHA Authentication is selected.
Default Configuration
No user entry exists.
Command Mode
Global Configuration mode
User Guidelines
If the SNMP local engine ID is changed, configured users will no longer be able to connect
and will need to be reconfigured.
Example
The following example configures an SNMPv3 user "John" in group "user-group".
console(config)# snmp-server user John user-group