Dell PowerEdge M805 - Manual (Page 156)

122 Address Table Commands
www
.dell.com | support.dell.com
Example
In this example, all classes of entries in the port-lock status are displayed.
console#show ports security
Port Status Action Maximum Trap Frequency
---- ------ ----------------- -------- ------- -------
1/g1 Locked Discard 3 Enable 100
1/g2 Unlocked - 28 - -
1/g3 Locked Discard, Shutdown 8 Disable -
The following table describes the fields in this example.
show ports security addresses
Use the show ports security addresses command in Privileged EXEC mode to display current
dynamic addresses in locked ports.
Syntax
show ports security addresses {ethernet interface|port-channel port-channel-number}
• interface—Valid Ethernet port
• port-channel-number—Valid port-channel number
Default Configuration
This command has no default configuration.
Field Description
Port The port number.
Status The status can be one of the following: Locked or
Unlocked.
Actions Action on violations.
Maximum The maximum addresses that can be associated on this
port in Static Learning mode or in Dynamic Learning
mode.
Trap Indicates if traps would be sent in case of violation.
Frequency The minimum time between consecutive traps.