Show snmp engineid – Dell PowerEdge M805 User Manual
Page 430
422
SNMP Commands
www
.dell.com | support.dell.com
Community-String Group name IP address
---------------- --------- ----------
public user-group All
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type
Community Version UDP Filter TO Retries
Port name Sec
-------------- ------ --------- ------- ---- ------ --- -----
192.122.173.42 Trap public 2 162 filt1 15 3
192.122.173.42 Inform public 2 162 filt2 15 3
Version 3 notifications
Target Address Type Username Security UDP Filter TO Retries
Level Port name Sec
-------------- ----- -------- -------- ---- ------ --- ------
192.122.173.42 Inform Bob Priv 162 filt31 15 3
System Contact: Robert
System Location: Marketing
show snmp engineID
Use the show snmp engineID command in Privileged EXEC mode to display the ID of the local
Simple Network Management Protocol (SNMP) engine.
Syntax
show snmp engineID
Default Configuration
This command has no default configuration.