Dell PowerEdge M805 - Manual (Page 567)

DHCP and BOOTP Relay Commands 567
DHCP and BOOTP Relay Commands
bootpdhcprelay cidridoptmode
Use the bootpdhcprelay cidridoptmode command in Global Configuration mode to enable the
circuit ID option and remote agent ID mode for BootP/DHCP Relay on the system. Use the no
form of the command to disable the circuit ID option and remote agent ID mode for BootP/DHCP
Relay.
Syntax
bootpdhcprelay cidridoptmode
no bootpdhcprelay cidridoptmode
Default Configuration
Disabled is the default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables the circuit ID and remote agent ID options.
console(config)#bootpdhcprelay cidridoptmode
Circuit Id and Remote Agent Id Mode set Successfully.
bootpdhcprelay enable
Use the bootpdhcprelay enable command in Global Configuration mode to enable the forwarding
of relay requests for BootP/DHCP Relay on the system. Use the no form of the command to disable
the forwarding of relay requests for BootP/DHCP Relay.