Dell PowerEdge M805 - Manual (Page 647)

IPv6 Routing Commands 651
Received Datagrams Locally Delivered...................... 0
Received Datagrams Discarded Due To Header Errors......... 0
Received Datagrams Discarded Due To MTU................... 0
Received Datagrams Discarded Due To No Route.............. 0
Received Datagrams With Unknown Protocol.................. 0
Received Datagrams Discarded Due To Invalid Address....... 0
Received Datagrams Discarded Due To Truncated Data........ 0
Received Datagrams Discarded Other........................ 0
Received Datagrams Reassembly Required.................... 0
Datagrams Successfully Reassembled........................ 0
Datagrams Failed To Reassemble............................ 0
Datagrams Forwarded....................................... 0
Datagrams Locally Transmitted............................. 0
Datagrams Transmit Failed................................. 0
Datagrams Successfully Fragmented......................... 0
Datagrams Failed To Fragment.............................. 0
Fragments Created......................................... 0
Multicast Datagrams Received.............................. 0
Multicast Datagrams Transmitted........................... 0
show ipv6 vlan
Use the show ipv6 vlan command in Privileged EXEC mode to display IPv6 VLAN routing
interface addresses.
Syntax
show ipv6 vlan
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode