Dell PowerEdge M805 - Manual (Page 758)

766 PIM-DM Commands
www
.dell.com | support.dell.com
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays interface information for VLAN 11 PIM-DM.
console(config)#show ip pimdm interface vlan 11
Interface Mode................................. Disable
Hello Interval (secs).......................... 30
show ip pimdm interface stats
Use the show ip pimdm interface stats command in Privileged EXEC mode to display the
statistical information for PIM-DM on the specified interface.
Syntax
show ip pimdm interface stats [vlan vlan-id | all]
• vlan-id—A valid VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example display the statistical information for PIM-DM on all interfaces.
console(config)#show ip pimdm interface stats all
Hello Designated
Interface IP Address Nbr Count Interval Router
---------- --------------- --------- ---------- ---------------