Port channel commands, Spanning tree commands, Port channel commands spanning tree commands – Dell PowerEdge M805 User Manual
Page 63
Command Groups
25
Port Channel Commands
Spanning Tree Commands
Command
Description
Mode*
channel-group
Associates a port with a port-channel.
IC
interface port-channel
Enters the interface configuration mode of a specific
port-channel.
GC
interface range port-channel
Enters the interface configuration mode to configure
multiple port-channels.
GC
hashing-mode
Sets the hashing algorithm on trunk ports.
IC (port-
channel)
no hashing-mode
Sets the hashing algorithm on trunk ports to default (3). IC (port-
channel)
show interfaces port-channel
Displays port-channel information.
PE
show statistics port-channel
Displays port-channel statistics.
PE
*NOTE:
For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command
Description
Mode*
abort (mst)
Exits the MST configuration mode without applying
configuration changes.
MC
clear spanning-tree detected-
protocols
Restarts the protocol migration process on all interfaces or
on the specified interface.
PE
exit (mst)
Exits the MST configuration mode and applies
configuration changes.
MC
instance (mst)
Maps VLANs to an MST instance.
MC
name (mst)
Defines the MST configuration name.
MC
revision (mst)
Defines the configuration revision number.
MC
show (mst)
Displays the current or pending MST region configuration
MC
show spanning-tree
Displays spanning tree configuration.
PE
spanning tree
Enables spanning-tree functionality.
GC
spanning-tree bpdu
Defines the bridge protocol data unit (BPDU) handling
when spanning tree is disabled on an interface.
GC
spanning-tree bpdu-protection
Enables BPDU protection on a switch.
GC
spanning-tree cost
Configures the spanning tree path cost for a port.
IC