Dell PowerEdge M805 - Manual (Page 528)

524 VLAN Commands
www
.dell.com | support.dell.com
----------------------- -------
0001.0001.0001.0001 1
console#
show vlan association subnet
Use the show vlan association subnet command in Privileged EXEC mode to display the VLAN
associated with a specific configured IP-Address and netmask. If no IP Address and net mask are
specified, the VLAN associations of all the configured IP-subnets are displayed.
Syntax
show vlan association subnet [ip-address ip-mask ]
• ip-address—Specifies IP address to be shown
• ip-mask—Specifies IP mask to be shown
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The command has no user guidelines.
Example
The following example shows the case if no IP Subnet to VLAN association exists.
console#show vlan association subnet
IP Address IP Mask VLAN ID
---------------- ---------------- -------
The IP Subnet to VLAN association does not exist.