Dell PowerEdge M805 - Manual (Page 434)

426 SNMP Commands
www
.dell.com | support.dell.com
show snmp users
Use the show snmp users Privileged EXEC command to display the configuration of users.
Syntax
show snmp users [username]
• username—Specifies the name of the user. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the configuration of users with the user name specified.
Console # show snmp users
Name Group Name Auth Priv
Meth Meth Remote Engine ID
--------------- --------------- ---- ---- -------------------
bob user-group MD5 DES 800002a20300fce3900106
john user-group SHA DES 800002a20300fce3900106
Console # show snmp users bob
Name Group Name Auth Priv
Meth Meth Remote Engine ID
--------------- --------------- ---- ---- -------------------
Notify A string that is the name of the view that enables
you to specify an inform or a trap
Field Description