Dell PowerEdge M805 - Manual (Page 804)

818 Virtual Router Redundancy Protocol Commands
www
.dell.com | support.dell.com
User Guidelines
This command has no user guidelines.
Example
The following example in Interface Configuration mode sets the frequency at which the
VLAN 15 virtual router sends a virtual router advertisement.
console(config-if-vlan15)#ip vrrp 5 timers advertise 10
show ip vrrp
Use the show ip vrrp command in Privileged EXEC mode to display whether VRRP functionality is
enabled or disabled on the switch. The command also displays some global parameters which are
required for monitoring.
Syntax
show ip vrrp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example in Interface Configuration displays VRRP’s enabled status.
console#show ip vrrp
Admin Mode..................................... Enable
Router Checksum Errors......................... 0
Router Version Errors.......................... 0
Router VRID Errors............................. 0
show ip vrrp interface
Use the show ip vrrp interface command in Privileged EXEC mode to display all configuration
information and VRRP router statistics of a virtual router configured on a specific interface.
Syntax