Dell PowerEdge M805 - Manual (Page 328)

310 IP Addressing Commands
www
.dell.com | support.dell.com
Command Mode
Privileged EXEC mode
User Guidelines
Note that this command only show ARP entries used by the management interface. It is
logically separate from the ARP table used by the routing interfaces. See the show arp
command for details on how to view ARP entries for the routing interfaces.
Example
The following example displays ARP table information.
console#show arp switch
MAC Address IP Address
------------------- ----------------
00:0F:B5:34:90:C5 10.240.4.1
show hosts
Use the show hosts command in User EXEC mode to display the default domain name, a list of
name server hosts, and the static and cached list of host names and addresses. The command itself
shows hosts [hostname].
• Host name. (Range: 1 - 255 characters)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about IP hosts.
console>show hosts
Host name:
Default domain: gm.com, sales.gm.com, usa.sales.gm.com
Name/address lookup is enabled
Name servers (Preference order): 176.16.1.18 176.16.1.19