Dell PowerEdge M805 - Manual (Page 779)

Router Discovery Protocol Commands 787
User Guidelines
This command has no user guidelines.
Example
The following example sets the ip irdp preference to 1000 for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip irdp preference 1000
show ip irdp
Use the show ip irdp command in Privileged EXEC mode to display the router discovery
information for all interfaces, or for a specified interface.
Syntax
show ip irdp {vlan vlan-id |all}
• vlan-id—Valid VLAN ID
• all—Shows information for all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows router discovery information for VLAN 15.
console#show ip irdp vlan 15
Interface Ad Mode Advertise Address Max Int Min Int Hold Time Preference
---------- ------- ----------------- ------- ------- -------- ----------
vlan15 Enable 224.0.0.1 600 450 1800 0