Dell PowerEdge M805 - Manual (Page 770)

778 PIM-SM Commands
www
.dell.com | support.dell.com
Example
The following example displays interface information for VLAN 11 PIM-SM.
console#show ip pimsm interface vlan 11
Interface...................................... 11
IP Address..................................... 0.0.0.0
Subnet Mask.................................... 0.0.0.0
Mode........................................... Disable
Hello Interval (secs).......................... 30 secs
CBSR Preference................................ 0
CRP Preference................................. 0
CBSR Hash Mask Length.......................... 30
show ip pimsm interface stats
Use the show ip pimsm interface stats command in User EXEC mode to display the statistical
information for PIM-SM on the specified interface.
Syntax
show ip pimsm interface stats {vlan vlan-id|all}
• vlan-id—Valid VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays statistical information for PIM-SM on all interfaces.
console> show ip pimsm interface stats all
Designated Neighbor
Interface IP Address Mask Router Count
---------- --------------- --------- ---------- ---------------