Dell PowerEdge M805 - Manual (Page 135)

AAA Commands 101
ip http authentication
Use the ip http authentication command in Global Configuration mode to specify authentication
methods for http server users. To return to the default, use the no form of this command.
Syntax
ip http authentication method1 [method2...]
no ip http authentication
• method1 [method2...]—Specify at least one from the following table:
Default Configuration
The local user database is checked. This action has the same effect as the command ip http
authentication local.
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return an
error, specify none as the final method in the command line. For example, if none is specified
as an authentication method after radius, no authentication is used if the RADIUS server is
down.
Example
The following example configures the http authentication.
console(config)# ip http authentication radius local
ip https authentication
Use the ip https authentication command in Global Configuration mode to specify authentication
methods for https server users. To return to the default configuration, use the no form of this
command.
Keyword Source or destination
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS+ servers for authentication.