Dell PowerEdge M805 - Manual (Page 60)

22 Command Groups
www
.dell.com | support.dell.com
Radius Commands
show classofservice ip-dscp-
mapping Displays the current IP DSCP mapping to internal traffic
classes for a specific interface. PE
show classofservice trust Displays the current trust mode setting for a specific
interface. PE
show diffserv Displays the DiffServ General Status information. PE
show diffserv service interface
ethernet in Displays policy service information for the specified
interface and direction. PE
show diffserv service interface
port-channel in Displays policy service information for the specified
interface and direction. PE
show diffserv service brief Displays all interfaces in the system to which a DiffServ
policy has been attached. PE
show interfaces cos-queue Displays the class-of-service queue configuration for the
specified interface. PE
show policy-map Displays all configuration information for the specified
policy. PE
show policy-map interface Displays policy-oriented statistics information for the
specified interface and direction PE
show service-policy Displays a summary of policy-oriented statistics
information for all interfaces in the specified direction. PE
traffic-shape Specifies the maximum transmission bandwidth limit for
the interface as a whole. GC and
IC
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
auth-port Sets the port number for authentication requests of
the designated radius server
.
R
deadtime Improves Radius response times when a server is
unavailable by causing the unavailable server to be skipped. R
key Sets the authentication and encryption key for all
RADIUS communications between the switch and the
RADIUS daemon
.
R
priority Specifies the order in which the servers are to be used, with
0 being the highest priority. R
radius-server deadtime Improves RADIUS response times when servers are
unavailable. Causes the unavailable servers to be skipped. GC
Command Description Mode*