Dell PowerEdge M805 - Manual (Page 44)

6 Command Groups
www
.dell.com | support.dell.com
Address Table Commands
ip https authentication Specifies authentication methods for https. GC
login authentication Specifies the login authentication method list for a remote
telnet or console. LC
password Specifies a password on a line. LC
password Specifies a user password UE
show authentication methods Shows information about authentication methods PE
show user accounts Displays information about the local user database PE
show users login-history Displays information about login histories of users PE
username Establishes a username-based authentication system. GC
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
bridge address Adds a static MAC-layer station source address to the
bridge table. IC
bridge aging-time Sets the address table aging time. GC
bridge multicast address Registers MAC-layer Multicast addresses to the bridge
table, and adds static ports to the group. IC
bridge multicast filtering Enables filtering of Multicast addresses. GC
bridge multicast forbidden
address Forbids adding a specific Multicast address to specific
ports. IC
bridge multicast forbidden
forward-unregistered Forbids a port to be a forwarding-unregistered-multicast-
addresses port. IC
bridge multicast forward-all Enables forwarding of all Multicast packets on a port. IC
bridge multicast forward-
unregistered Enables the forwarding of unregistered multicast addresses IC
clear bridge Removes any learned entries from the forwarding database. PE
port security Disables new address learning on an interface. IC
port security max Configures the maximum addresses that can be learned on
the port while the port is in port security mode. IC
show bridge address-table Displays dynamically created entries in the bridge-
forwarding database. PE
Command Description Mode*