Dell PowerEdge M805 - Manual (Page 77)

Command Groups 39
OSPF Commands
show ip mcast interface Displays the multicast information for the specified
interface. PE
show ip mcast mroute Displays a summary or all the details of the multicast table. PE
show ip mcast mroute group Displays the multicast configuration settings of entries in
the multicast mroute table. PE
show ip mcast mroute source Displays the multicast configuration settings of entries in
the multicast mroute table. PE
show ip mcast mroute static Displays all the static routes configured in the static mcast
table. PE
show mrinfo Displays neighbor information of a multicast-capable
router. PE
show mstat Displays the results of packet rate and loss information
from the results buffer pool of the router. PE
show mtrace Displays results of multicast trace path from the results
buffer pool of the router PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
area default-cost Configures the monetary default cost for the stub area. ROSPF
area nssa Configures the specified area ID to function as an NSSA. ROSPF
area nssa default-info-originate Configures the metric value and type for the default route
advertised into the NSSA. ROSPF
area nssa no-redistribute Configures the NSSA Area Border router (ABR) so that
learned external routes are not redistributed to the NSSA. ROSPF
area nssa no-summary Configures the NSSA so that summary LSAs are not
advertised into the NSSA. ROSPF
area nssa translator-role Configures the translator role of the NSSA. ROSPF
area nssa translator-stab-intv Configures the translator stability interval of the NSSA. ROSPF
area range Creates a specified area range for a specified NSSA. ROSPF
area stub Creates a stub area for the specified area ID. ROSPF
area stub no-summary Prevents Summary LSAs from being advertised into the
NSSA. ROSPF
Command Description Mode*