Dell PowerEdge M805 - Manual (Page 773)

PIM-SM Commands 781
Example
The following example displays the RP router being selected from the set of active RP routers.
console#show ip pimsm rphash 224.5.5.5
There are no static RPs for that group on the router.
show ip pimsm staticrp
Use the show ip pimsm staticrp command in Privileged EXEC mode to display the static RP
information for the PIM-SM router.
Syntax
show ip pimsm staticrp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the static RP information for the PIM-SM router.
console#show ip pimsm staticrp
STATIC RP TABLE
Address Group Address Group Mask
------------- --------------- ---------------
10.1.1.1 224.5.5.5 255.255.255.255