Dell PowerEdge M805 - Manual (Page 387)

QoS Commands 375
redirect
Use the redirect command in Policy-Class-Map Configuration mode to specify that all incoming
packets for the associated traffic stream are redirected to a specific egress interface (physical port or
port-channel).
Syntax
redirect interface
• interface—Specifies any valid interface. Interface is Ethernet port or port-channel
(Range: lag1–lag18)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to redirect incoming packets to port 1/g1.
console( config-policy-classmap )#redirect 1/g1
service-policy
Use the service-policy command in either Global Configuration mode (for all system interfaces) or
Interface Configuration mode (for a specific interface) to attach a policy to an interface. To return
to the system default, use the no form of this command.
Syntax
service-policy in policymapname
no service-policy in policymapname
• policymapname—Specifies the DiffServ policy name as a unique case-sensitive
alphanumeric string. (Range: 1 - 31 alphanumeric characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode (for all system interfaces)