Dell PowerEdge M805 - Manual (Page 416)

408 RMON Commands
www
.dell.com | support.dell.com
• community text—If an SNMP trap is to be sent, it is sent to the SNMP community
specified by this octet string. (Range: 0-127 characters)
• description text—A comment describing this event. (Range 0-127 characters)
• owner name—Enter a name that specifies who configured this event. If unspecified, the
name is an empty string.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures an event with the trap index of 10.
console(config)#rmon event 10 log
rmon table-size
Use the rmon table-size command in Global Configuration mode to configure the maximum
RMON tables sizes. To return to the default configuration, use the no form of this command.
Syntax
rmon table-size {history entries | log entries}
no rmon table-size {history | log}
• history entries—Maximum number of history table entries. (Range: 20 - 270)
• log entries—Maximum number of log table entries. (Range: 20 - 100)
Default Configuration
History table size is 270.
Log table size is 200.
Command Mode
Global Configuration mode