Show stack-port – Dell PowerEdge M805 User Manual
Page 283
System Management Commands
261
show stack-port
Use the show stack-port command in Privileged EXEC mode to display summary stack-port
information for all interfaces.
Syntax
show stack-port
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the summary stack-port.
console#show stack-port
............... .Configured Running
Stack
Stack
Link
Link
Unit Interface Mode Mode
Status
Speed (Gb/s)
---- ---------
---------- -------- --------
------------
1 xg1 Stack Stack Link Down 12
1 xg2 Stack Stack Link Down 12
1 xg3 Ethernet Ethernet Link Down 10
1 xg4 Ethernet Ethernet Link Down 10
The following table explains the fields in the example.
Field
Description
Interface
Unit/Port
Configured Stack Mode
Stack or Ethernet
Running Stack Mode
Stack of Ethernet