Dell PowerEdge M805 - Manual (Page 276)

254 System Management Commands
www
.dell.com | support.dell.com
• Destination unreachable—The gateway for this destination indicates that the destination
is unreachable. In such cases, the "Host unreachable" message appears.
• Network or host unreachable—The switch found no corresponding entry in the route
table. In such cases the "Network or Host unreachable" message appears.
Examples
The following example displays a ping to IP address 10.1.1.1.
console>ping 10.1.1.1
Pinging 10.1.1.1 with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11
console>
The following example displays a ping to yahoo.com.
console#ping yahoo.com
Pinging yahoo.com [66,217,71,198] with 64 bytes of data;
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11
reload
Use the reload command in Privileged EXEC mode to reload stack members.