Dell PowerEdge M805 - Manual (Page 453)

Port Channel Commands 445
Example
Console#show interfaces port-channel
Channel Ports Hashing-mode
------- --------------------------------------- ------------
ch1 Active: 1/e1, 2/e2 1
ch2 Active: 2/e2, 2/e7 Inactive: 3/e1 2
ch3 Active: 3/e3, 3/e8 3 <default>
ch4 No Configured Ports 5
ch5 No Configured Ports 6
ch6 No Configured Ports 4
ch7 No Configured Ports 3 <default>
ch8 No Configured Ports 3 <default>
Hash algorithm type
1 - Source MAC, VLAN, EtherType, source module and port Id
2 - Destination MAC, VLAN, EtherType, source module and port Id
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, EtherType and source MODID/port
6 - Source/Destination IP and source/destination TCP/UDP port
show statistics port-channel
Use the show statistics port-channel command in Privileged EXEC mode to display statistics
about a specific port-channel.
Syntax
show statistics port-channel port-channel-number
• port-channel-number—Valid port-channel number channel to display.
Default Configuration
This command has no default configuration.