Gvrp commands, Igmp snooping commands, Gvrp commands igmp snooping commands – Dell PowerEdge M805 User Manual
Page 48
10
Command Groups
www
.dell.com | support.dell.com
GVRP Commands
IGMP Snooping Commands
Command
Description
Mode*
clear gvrp statistics
Clears all the GVRP statistics information.
PE
garp timer
Adjusts the GARP application join, leave, and leaveall
GARP timer values.
IC
gvrp enable (global)
Enables GVRP globally.
GC
gvrp enable (interface)
Enables GVRP on an interface.
IC
gvrp registration-forbid
De-registers all VLANs, and prevents dynamic VLAN
registration on the port.
IC
gvrp vlan-creation-forbid
Enables or disables dynamic VLAN creation.
IC
show gvrp configuration
Displays GVRP configuration information,
including
timer values, whether GVRP and dynamic VLAN
creation is enabled, and which ports are running GVRP
PE
show gvrp error-statistics
Displays GVRP error statistics.
UE
show gvrp statistics
Displays GVRP statistics.
UE
*NOTE:
For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command
Description
Mode*
ip igmp snooping (Global)
In Global Config mode, Enables Internet Group
Management Protocol (IGMP) snooping.
GC
VLAN
ip igmp snooping (Interface)
Enables Internet Group Management Protocol (IGMP)
snooping on a specific VLAN.
IC
ip igmp snooping host-time-out
Configures the host-time-out.
IC
ip igmp snooping leave-time-out
Configures the leave-time-out.
IC
ip igmp snooping mrouter-time-
out
Configures the mrouter-time-out.
IC
show ip igmp snooping groups
Displays Multicast groups learned by IGMP snooping.
UE
show ip igmp snooping interface
Displays IGMP snooping configuration.
PE
show ip igmp snooping mrouter
Displays information on dynamically learned Multicast
router interfaces.
PE
ip igmp snooping (VLAN)
In VLAN Config mode, enables IGMP snooping on a
particular VLAN or on all interfaces participating in a
VLAN.
GC
VLAN