Dell PowerEdge M805 - Manual (Page 752)

758 OSPFv3 Commands
www
.dell.com | support.dell.com
Syntax
show ipv6 ospf stub table
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF stub table.
console#show ipv6 ospf stub table
AreaId TypeofService Metric Val Import SummaryLSA
------------ ------------- ---------- -----------------
0.0.0.10 Normal 1 Enable
show ipv6 ospf virtual-link
Use the show ipv6 ospf virtual-link command in Privileged EXEC mode to display the OSPF
Virtual Interface information for a specific area and neighbor.
Syntax
show ipv6 ospf virtual-link areaid neighbor
• areaid—Identifies the OSPF area whose virtual interface information is being displayed.
• neighbor—Router ID of neighbor.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.