Dell PowerEdge M805 - Manual (Page 800)

814 Virtual Router Redundancy Protocol Commands
www
.dell.com | support.dell.com
The following example in Interface Configuration mode enables VRRP protocol on VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip vrrp 5
ip vrrp authentication
Use the ip vrrp authentication command in Interface Configuration mode to set the authorization
details value for the virtual router configured on a specified interface. Use the no form of the
command to return the priority to the default value.
Syntax
ip vrrp vr-id authentication {none | simple key}
no ip vrrp vr-id authentication
• vr-id—The virtual router identifier. (Range: 1-255)
• none—Indicates authentication type is none.
• simple—Authentication type is a simple text password.
• key—The key for simple authentication. (Range: String values)
Default Configuration
None is the default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example in Interface Configuration mode sets the authorization details value
for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip vrrp 5 authentication simple test123
ip vrrp ip
Use the ip vrrp ip command in Interface Configuration mode to set the virtual router IP address
value for an interface. Use the no form of the command to remove the secondary IP address.
Syntax