Ospfv3 commands – Dell PowerEdge M805 User Manual
Page 80
42
Command Groups
www
.dell.com | support.dell.com
OSPFv3 Commands
trapflags
Enables OSPF traps.
ROSPF
1583compatibility
Enables OSPF 1583 compatibility.
ROSPF
*NOTE:
For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command
Description
Mode*
area default-cost
Configures the monetary default cost for the stub area.
ROSV3
area nssa
Configures the specified areaid to function as an NSSA.
ROSV3
area nssa default-info-originate
Configures the metric value and type for the default route
advertised into the NSSA.
ROSV3
area nssa no-redistribute
Configures the NSSA ABR so that learned external routes
will not be redistributed to the NSSA.
ROSV3
area nssa no-summary
Configures the NSSA so that summary LSAs are not
advertised into the NSSA.
ROSV3
area nssa translator-role
Configures the translator role of the NSSA.
ROSV3
area nssa translator-stab-intv
Configures the translator stability interval of the NSSA.
ROSV3
area range
Creates an area range for a specified NSSA.
ROSV3
area stub
Creates a stub area for the specified area ID.
ROSV3
area stub no-summary
Disables the import of Summary LSAs for the stub area
identified by areaid.
ROSV3
area virtual-link
Creates the OSPF virtual interface for the specified areaid
and neighbor.
ROSV3
area virtual-link dead-interval
Configures the dead interval for the OSPF virtual interface
on the virtual interface identified by areaid and neighbor.
ROSV3
area virtual-link hello-interval
Configures the hello interval for the OSPF virtual interface
on the virtual interface identified by areaid and neighbor.
ROSV3
area virtual-link retransmit-
interval
Configures the retransmit interval for the OSPF virtual
interface on the virtual interface identified by areaid and
neighbor.
ROSV3
area virtual-link transmit-delay
Configures the transmit delay for the OSPF virtual
interface on the virtual interface identified by areaid and
neighbor.
ROSV3
default-information originate
Controls the advertisement of default routes.
ROSV3
Command
Description
Mode*