Dell PowerEdge M805 - Manual (Page 50)

12 Command Groups
www
.dell.com | support.dell.com
Link Dependency Commands
LLDP Commands
Command Description Mode*
link-dependency group Enters the link-dependency mode to configure a
link-dependency group. Link Dependency
no link-dependency group Removes the configuration for a link-dependency
group. Link Dependency
add ethernet Adds member Ethernet port(s) to the
dependency list. Link Dependency
no add ethernet Removes member Ethernet port(s) from the
dependency list. Link Dependency
add port-channel Adds member port-channels to the dependency
list. Link Dependency
no add port-channel Removes member port-channels from the
dependency list. Link Dependency
depends-on ethernet Adds the dependent Ethernet ports list. Link Dependency
no depends-on ethernet Removes the dependent Ethernet ports list. Link Dependency
depends-on port-channel Adds the dependent port-channels list. Link Dependency
no depends-on port-channel Removes the dependent port-channels list. Link Dependency
show link-dependency Shows the link dependencies configured on a
particular group. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
clear lldp remote data Deletes all data from the remote data table. PE
clear lldp statistics Resets all LLDP statistics. PE
lldp notification Enables remote data change notifications. IC
lldp notification-interval Limits how frequently remote data change notifications are
sent. GC
lldp receive Enables the LLDP receive capability. IC
lldp timers Sets the timing parameters for local data transmission on
ports enabled for LLDP. GC