Dell PowerEdge M805 - Manual (Page 291)

System Management Commands 269
show switch
Use the show switch command in User EXEC mode to display information about all units in the
stack. Use the show switch [unit] command to display the information about a specific unit on the
stack.
Syntax
show switch [unit]
• unit—The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays stack status information for the switch.
console>show switch 1
Switch............................ 1
Management Status................. Management Switch
Admin Management Preference....... 4
Switch Type....................... 0x73950001
Preconfigured Model Identifier.... PCT6224
Plugged-in Model Identifier....... PCT6224
Switch Status..................... OK
Switch Description................ PCT6224
Expected Code Type................ 0x100b000
Detected Code Version............. I.12.21.1
Detected Code in Flash............ I.12.21.1
Boot Code Version................. I.12.1
Up Time........................... 1 days 0 hrs 16 mins 37 secs