Dell PowerEdge M805 - Manual (Page 240)

212 Link Dependency Commands
www
.dell.com | support.dell.com
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)#depends-on port-channel 6
no depends-on port-channel
Use the no depends-on port-channel command to remove the dependent port-channels list.
Syntax
no depends-on port-channel port-channel-list
• port-channel-list—List of port-channel interfaces. Separate nonconsecutive ports with a
comma and no spaces. Use a hyphen to designate the range of ports. (Range: Valid port-
channel interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)# no depends-on port-channel 6
show link-dependency
Use the show link-dependency command to show the link dependencies configured for a particular
group. If no group is specified, then all the configured link-dependency groups are displayed.
Syntax
show link-dependency [group GroupId]
• GroupId—Link dependency group identifier. (Range: Valid Group Id, 1–16)
Default Configuration
This command has no default configuration.