Dell PowerEdge M805 - Manual (Page 521)

VLAN Commands 517
Example
The following example displays how to add all physical interfaces to the protocol-based group
identified by group ID "2."
console(config)#protocol vlan group all 2
show dvlan-tunnel
Use the show dvlan-tunnel command in Privileged EXEC mode to display all interfaces enabled for
Double VLAN Tunneling.
Syntax
show dvlan-tunnel unit/port
• unit/port—A valid unit and port number separated by forward slashes (/).
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display all interfaces for Double VLAN Tunneling.
console#show dvlan-tunnel
Interfaces Enabled for DVLAN Tunneling......... 1/g1
show dvlan-tunnel interface
Use the show dvlan-tunnel interface command in Privileged EXEC mode to display detailed
information about Double VLAN Tunneling for the specified interface or all interfaces.
Syntax
show dvlan-tunnel interface {unit/port|all}
• unit/port—A valid unit and port number separated by forward slashes (/).
• all—Displays information for all interfaces.
Default Configuration
This command has no default configuration.