Dell PowerEdge M805 - Manual (Page 672)

678 OSPF Commands
www
.dell.com | support.dell.com
area nssa no-summary
Use the area nssa no-summary command in Router OSPF Configuration mode to configure the
NSSA so that summary LSAs are not advertised into the NSSA.
Syntax
area area-id nssa no-summary
no area area-id nssa no-summary
• area-id—Identifies the OSPF NSSA to configure. (Range: 0-4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Router OSPF Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the NSSA so that summary LSAs are not advertised into
the NSSA.
console(config-router)#area 20 nssa no-summary
area nssa translator-role
Use the area nssa translator-role command in Router OSPF Configuration mode to configure the
translator role of the NSSA.
Syntax
area area-id nssa translator-role {always | candidate}
no area area-id nssa translator-role
• area-id—Identifies the OSPF NSSA to configure. (Range: IP address or decimal from 0-
4294967295)
• always—The router assumes the role of the translator when it becomes a border router.
• candidate—The router to participate in the translator election process when it attains
border router status.
Default Configuration
The default role is candidate.