Dell PowerEdge M805 - Manual (Page 365)

QoS Commands 353
QoS Commands
assign-queue
Use the assign-queue command in Policy-Class-Map Configuration mode to modify the queue ID
to which the associated traffic stream is assigned.
Syntax
assign-queue <queueid>
• queueid—Specifies a valid queue ID. (Range: integer from 0–6.)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to change the queue ID to 4 for the associated traffic
stream.
console(config-policy-classmap)#assign-queue 4
class
Use the class command in Policy-Map Class Configuration mode to create an instance of a class
definition within the specified policy for the purpose of defining treatment of the traffic class
through subsequent policy attribute statements.
Syntax
class classname