Dell PowerEdge M805 - Manual (Page 710)

716 OSPF Commands
www
.dell.com | support.dell.com
Command Mode
Router OSPF Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the SPF delay and hold time.
console(config-router)#timers spf 20 30
trapflags
Use the trapflags command in Router OSPF Configuration mode to enable OSPF traps. Use the
no form of the command to disable OSPF traps.
Syntax
trapflags
no trapflags
Default Configuration
Enabled is the default configuration.
Command Mode
Router OSPF Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables OSPF traps.
console(config-router)#trapflags
1583compatibility
Use the 1583compatibility command in Router OSPF Configuration mode to enable OSPF 1583
compatibility. Use the no form of the command to disable it.
Syntax
1583compatibility
no 1583compatibility