Dell PowerEdge M805 - Manual (Page 339)

802.1x Commands 323
show dot1x
Use the show dot1x command in Privileged EXEC mode to display 802.1x status for the switch or
for the specified interface.
Syntax
show dot1x [ethernet interface]
• interface — A valid Ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1x port g11 status.
console#show dot1x ethernet 1/g2
Administrative mode...............disabled
Port Admin Oper Reauth Reauth Username
Mode Mode Control Period
-------- -------- ----------- --------- ------ --------
1/g2 Auto Authorized FALSE 3600 n/a
Quiet Period................................... 60
Transmit Period................................ 30
Maximum Requests............................... 2
Supplicant Timeout............................. 30
Server Timeout (secs).......................... 30
Authenticator PAE State........................ Initialize
Backend Authentication State................... Initialize
console#