Dell PowerEdge M805 - Manual (Page 319)

IP Addressing Commands 301
IP Addressing Commands
clear host
Use the clear host command in Privileged EXEC mode to delete entries from the host name-to-
address cache.
Syntax
clear host {name|*}
• name—Host name to be deleted from the host name-to-address cache. (Range: 1-255
characters)
• *—Deletes all entries in the host name-to-address cache.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example deletes all entries from the host name-to-address cache.
console#clear host *
helper-address
Use the helper-address command in Interface Configuration mode to enable forwarding User
Datagram Protocol (UDP) Broadcast packets received on an interface. To disable forwarding
Broadcast packets to specific addresses, use the no form of this command.