Dell PowerEdge M805 - Manual (Page 620)

624 IP Routing Commands
www
.dell.com | support.dell.com
B - BGP Derived, IA - OSPF Inter Area
E1 - OSPF External Type 1, E2 - OSPF External Type 2
N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA external type 2
show ip route preferences
Use the show ip route preferences command in Privileged EXEC mode displays detailed
information about the route preferences. Route preferences are used in determining the best route.
Lower router preference values are preferred over higher router preference values.
Syntax
show ip route preferences
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays IP route preferences.
console#show ip route preferences
Local.......................................... 0
Static......................................... 1
OSPF Intra..................................... 8
OSPF Inter..................................... 10
OSPF Ext T1.................................... 13
OSPF Ext T2.................................... 150
OSPF NSSA T1................................... 14
OSPF NSSA T2................................... 151
RIP............................................ 15