Dell PowerEdge M805 - Manual (Page 560)

560 ARP Commands
www
.dell.com | support.dell.com
Syntax
arp cachesize integer
no arp cachesize
• integer—Maximum number of ARP entries in the cache. (Range: 256-896)
Default Configuration
The default integer value is 896.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines an arp cachesize of 500.
console(config)#arp cachesize 500
arp dynamicrenew
Use the arp dynamicrenew command in Global Configuration mode to enable the ARP
component to automatically renew dynamic ARP entries when they age out. To disable the
automatic renewal of dynamic ARP entries when they age out, use the no form of the command.
Syntax
arp dynamicrenew
no arp dynamicrenew
Default Configuration
The default state is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console#configure
console(config)#arp dynamicrenew