Dell PowerEdge M805 - Manual (Page 362)

348 Configuration and Image File Commands
www
.dell.com | support.dell.com
--------- ---------------
image1 6351288
image2 6363424
fastpath.cfg 321894
show running-config
Use the show running-config command in Privileged EXEC mode to display the contents of the
currently running configuration file.
Syntax
show running-config [all | scriptname]
• all-—To display or capture the commands with settings and configuration that are equal
to the default value, include the all option.
• scriptname-—The output is displayed in script format, which can be used to configure
another switch with the same configuration. If the optional scriptname is provided with a
file name extension of ".scr", the output is redirected to a script file.
NOTE: If you issue the show running-config command from a serial connection, access to the switch
through remote connections (such as Telnet) is suspended while the output is being generated and
displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the running-config file.
console#show running-config
software version 1.1
hostname device
interface ethernet 1/g1
ip address 176.242.100.100 255.255.255.0