Dell PowerEdge M805 - Manual (Page 404)

394 Radius Commands
www
.dell.com | support.dell.com
Syntax
deadtime deadtime
• deadtime—The amount of time that the unavailable server is skipped over. (Range: 0-
2000 minutes)
Default Configuration
The default deadtime interval is 0 minutes.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before executing this
command.
Example
The following example specifies a deadtime interval of 60 minutes.
console(config)#radius-server host 192.143.120.123
console(config-radius)#deadtime 60
key
Use the key command in Radius mode to set the authentication and encryption key for all Radius
communications between the switch and the Radius server.
Syntax
key key-string
• key-string —Specifies the authentication and encryption key for all Radius
communications between the switch and the Radius server. This key must match the
encryption used on the Radius. (Range: 0-128 characters)
Default Configuration
The default for key-string is an empty string.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before executing this
command.