Dell PowerEdge M805 - Manual (Page 231)

LACP Commands 203
Example
The following example assigns an administrative LACP timeout for port 1/g8 to a long
timeout value.
console(config)#interface ethernet 1/g8
console(config-if-1/g8)#lacp timeout long
show lacp ethernet
Use the show lacp ethernet command in Privileged EXEC mode to display LACP information for
Ethernet ports.
Syntax
show lacp ethernet interface [parameters|statistics]
• Interface—Ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display LACP Ethernet interface information.
console#show lacp ethernet 1/g1
Port 1/g1 LACP parameters:
Actor
system priority: 1
system mac addr: 00:00:12:34:56:78
port Admin key: 30
port Oper key: 30
port Oper priority: 1
port Admin timeout: LONG
port Oper timeout: LONG