Dell PowerEdge M805 - Manual (Page 499)

Syslog Commands 493
logging buffered
Use the logging buffered command in Global Configuration mode to limit syslog messages
displayed from an internal buffer based on severity. To cancel the buffer use, use the no form of this
command.
Syntax
logging buffered level
no logging buffered
• level—Limits the message logging to a specified level buffer. (Range: emergency, alert,
critical, error, warning, notice, info, debug)
Default Configuration
The default value for level is info.
Command Mode
Global Configuration mode
User Guidelines
All the syslog messages are logged to the internal buffer. This command limits the commands
displayed to the user.
Example
The following example limits syslog messages displayed from an internal buffer based on the
severity level "error".
console(config)#logging buffered error
logging buffered size
Use the logging buffered size command in Global Configuration mode to change the number of
syslog messages stored in the internal buffer. To return the number of messages stored in the
internal buffer to the default value, use the no form of this command.
Syntax
logging buffered size number
no logging buffered size
• number—Numeric value indicating the maximum number of messages stored in the
history table. (Range: 20 - 400)