Dell PowerEdge M805 - Manual (Page 61)

Command Groups 23
RMON Commands
radius-server host Specifies a RADIUS server host. GC
radius-server key Sets the authentication and encryption key for all RADIUS
communications between the switch and the RADIUS
daemon. GC
radius-server retransmit Specifies the number of times the software searches the list
of RADIUS server hosts. GC
radius-server source-ip Specifies the source IP address used for communication
with RADIUS servers. GC
radius-server timeout Sets the interval for which a switch waits for a server host to
reply GC
retransmit Specifies the number of times the software searches the list
of RADIUS server hosts before stopping the search. R
show radius-servers Displays the RADIUS server settings. PE
source-ip Specifies the source IP address to be used for
communication with RADIUS servers. R
timeout Sets the timeout value in seconds for the designated radius
server. R
usage Specifies the usage type of the server. R
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
rmon alarm Configures alarm conditions. GC
rmon collection history Enables a Remote Monitoring (RMON) MIB history
statistics group on an interface. IC
rmon event Configures an RMON event. GC
rmon table-size Configures the maximum RMON tables sizes. GC
show rmon alarm Displays alarm configurations. UE
show rmon alarm-table Displays the alarms summary table. UE
show rmon collection history Displays the requested group of statistics. UE
show rmon events Displays the RMON event table. UE
show rmon history Displays RMON Ethernet Statistics history. UE
show rmon log Displays the RMON logging table. UE