Dell PowerEdge M805 - Manual (Page 40)

2 Command Groups
www
.dell.com | support.dell.com
DHCP Filtering Configures DHCP filtering and whether an interface is trusted for
filtering.
Ethernet Configuration Configures all port configuration options for example ports, storm
control, port speed and auto-negotiation.
GVRP Configures and displays GVRP configuration and information.
IGMP Snooping Configures IGMP snooping and displays IGMP configuration and
IGMP information.
IGMP Snooping Querier Configures IGMP Snooping Querier and displays IGMP Snooping
Querier information.
IP Addressing Configures and manages IP addresses on the switch.
LACP Configures and displays LACP information.
Link Dependency Configures and displays link dependency information.
Line Configures the console, SSH, and remote Telnet connection.
LLDP Configures and displays LLDP information.
Management ACL Configures and displays management access-list information.
Password Management Provides password management.
PHY Diagnostics Diagnoses and displays the interface status.
Port Channel Configures and displays Port channel information.
Port Monitor Monitors activity on specific target ports.
QoS Configures and displays QoS information.
RADIUS Configures and displays RADIUS information.
RMON Can be configured through the CLI and displays RMON information.
SNMP Configures SNMP communities, traps and displays SNMP
information.
Spanning Tree Configures and reports on Spanning Tree protocol.
SSH Configures SSH authentication.
Syslog Commands Manages and displays syslog messages.
System Management Configures the switch clock, name and authorized users.
TACACS+ Configures and displays TACACS+ information.
User Interface Describes user commands used for entering CLI commands.
VLAN Configures VLANs and displays VLAN information.
Web Server Configures Web based access to the switch.
Command Group Description